Raider Coastal 230 · “Doreen”
What’s on the boat
Exact models from Selkirk Coastal Rev.5, Electronics Pkg 5 sheet, and Finalized Contract Rev.2 — Honda BF350AUDA, Garmin 1243xsv / Fantom 18 / Force Kraken 90″, Seakeeper Ride, Burnewiin GM/RK mounts, and the rest.
Platform: 2026 Raider 230 Coastal (“Doreen”). Dealer: Selkirk Marine — Kylo Matlock. Specs below use factory model codes where the paperwork had them.
Hull, finish & trailer
2026 Raider 230 Coastal
Aluminum hull, 25'6" LOA × 102" beam. Raw aluminum exterior, white interior. Built by Raider / Selkirk — Colville, WA.
EZ Loader #7500 tandem trailer
Contract: EZLD #7500 EZ Loader. Pricing sheet also lists TSA7000T aluminum tandem axle with disc brakes, DP fenders, mag wheels, spare & carrier.
Full blackout package
Removes anodize look — added after core order (~$4k). Looks fire; trades some of the “stay cool” plan.
Slope-back canvas
Slope back canvas on the cabin / hardtop opening (on contract + Rev.5 sheet).
Power & control
Honda BF350AUDA — 350 hp (30" transom)
Single main. Digital engine / single-engine digital pre-rig + binnacle pod for digital rigging. No twin outboards; no separate kicker outboard.
Garmin Force Kraken 90" 36V — white
Bow-mount trolling motor. Package includes Odyssey AGM Group 31 batteries (×3) per Selkirk electronics menu.
2nd station @ bulkhead + main-engine controls
Full second helm with main-engine throttles (not kicker-only). Smartpump for autopilot mounts here.
Garmin Reactor 40 SmartPump S2 w/ GHC 50
Main-engine autopilot (“Main Engine AP” on the sheet — $6,328.99 line). No kicker autopilot.
Power-Pole shallow-water anchors
On Rev.5 + both contract revisions (~$5,000 equipment line; install TBD at quote).
Seakeeper Ride System
On Finalized Contract Rev.2 (factory install path after Jon confirmed). Ride trim-tab system — not the big gyro.
Lee Lock quick-change w/ CR roller + bow Lee Lock base
Bow mount hardware for the Kraken / quick-change setup.
Electronics (Pkg 5 + add-ons)
Electronics Package 5 (w/o DR’s)
2× Garmin GPSMAP 1243xsv · 1× Garmin 1243 slave · Airmar SS175HW transducer · Garmin Fantom 18 radar · 2× Garmin 215 AIS VHF · 2× Morad antennas w/ mounts · 2× Scotty 1106 downriggers w/ breakers · full install.
Garmin LiveScope LVS34
Mounted on the trolling motor (separate add line on the Coastal sheet).
Premium stereo package 4
Selkirk stereo pkg #4 (on Rev.5 + contract).
Radar arch with ski/tow — anodized
Hardtop / arch option on the sheet (with rod rocket launchers + anodized rod-holder trees).
(8) welded rod rocket launchers + rod-holder trees
Hardtop fishing hardware from the Coastal options sheet.
Interior, flooring & comfort
S5 suspension seats (×2)
Shockwave-style S5 suspension & seat upgrade — must be welded in; can’t add later.
AquaTraction — Brushed Beach Sand / Light Oak
Cockpit, gunwale tops & faces, deck, bow, offshore bracket. Custom name “Doreen” on the fishbox lid. Cabin plate deck + welded seat boxes under AT.
Welded plate aft deck w/ nonskid + welded interior
Full weld-out path for AT. Delete DP gunwale steps noted on sheet.
Slider cabin door
On order — blocked a starboard fish-cooler layout, so port rod locker stayed the play.
Porta-potty step box w/ canvas (port bench)
Contract annotation: portable potty cutout + curtain in port bench.
Forced-air diesel cabin heater
Cabin heat for cold Cumberland mornings.
2 cabin fans
On Rev.5 + contract.
Extra USB / 12V combo plug (passenger)
Coffee-maker-friendly passenger-side power.
Fishability & deck hardware
Burnewiin package — 4× GM650 / 6× GM300 / 6× RK300
Exact mount mix called out on the Rev.5 notes line.
4 pedestal flush mounts
Cost TBD on sheet for stand hardware beyond the flush mounts.
Insulated fish box + livewell in transom fish box
Livewell marked “not for bait” on sheet. Equalizer tube between livewell and sink annotated on final sheet.
Sink basin in transom + transom work tray w/ cup holders
Shark Hide coating deleted from the order when the work tray was locked.
Diamond-plate trash can w/ seat-top cushion
Seating top instead of cutting-board top.
Extended 4-position stern rails + dual welded rub rails
Stern rail storage / fishbox access thinking.
Rod locker storage — port
Port rod locker on sheet; starboard fish cooler dropped because of slider door.
Lighting & later adds
Rigid Marine 4" bow lights — FLOOD + SPOT pairs
Both pairs on the sheet / contract (“4" bow lights flood/spot”).
Under-gunwale lighting + dual-mount aft deck light
On Rev.5 lighting options.
Full shore-power package
Added June for slipping: 110V outlets, circuit breaker, battery charger, galvanic isolator — $1,467 (vs charger-only $797).
Additional sea-trial time
Paid extra trial time beyond the standard slot.
Timeline
How the order landed
Jan 26
0121D / Delta build sheet
Kylo sends first Raider build sheet + electronics package PDF.
Feb 1–3
02$1k show deposit
Slot locked with generalized contract + CC auth; details to iron out after the show.
Feb 19–23
03Coastal 230 + Honda 350 path
Size-up, Shockwave seats, Kraken, Power-Poles, second station, rod locker — quote iterations.
Feb 25–26
04Final build sheet + contract
Potty cutout, livewell equalizer, transom tray, shark hide off; contract signed path opens.
Mar 9
05Deposit in
Down payment confirmed; AquaTraction sample thread with Fastbass.
Contract Rev.2
06Seakeeper Ride on paper
Finalized Contract Rev.2 lists Seakeeper Ride System with the Coastal / BF350AUDA / Pkg 5 stack.
May 26–27
07Blackout + Doreen
Full blackout package; AquaTraction name Doreen on fishbox lid.
Jun 29–30
08Full shore power
Slipping the boat — full shore-power package added to the build.